antennas
LRA-M Series
JRS Global has recently launched new generation Antenna with latest technology having a symmetrical beam radiation pattern on both H and E plane. The connector less Modular twist-on Antenna assembly provides ease of Installation & de-installation for the field technicians.
Applications:
With MIMOSA C5X upto 700Mbps and B5X upto 1.5Gbps,
below applications can be served:
1. Backhaul PTP link delivery.
2.Small cell connectivity extension.
3.Fiber cut- stand-by.
4.Rural connectivity (Long hop distances up to 50Km).
SECTOR ANTENNA(4.9 - 5.9 GHz) for wierless communications p-p
Electrical Parameters
Frequency(MHz) 4900 - 5900
Gain(dBi) 2 X 16 +/- 0.5
VSWR(Max) 1.5:1
H Plane BW(Degree) 90+/-5
E Plane BW(Degree) 8+/-2
Polarization H&V
Port to Port Isolation(dB) >30
Max. Power Input(Watts) 50
Impedance 50
Front-to-Back Ratio(dB) >25
Cross Poln.(dB) >28
Connector Termination 2XN(F)
Lightning Protection DC Ground
Mechanical Parameters
Dimension 750X130X70
Gross weight 2.5
Radome UPVC
Mounting Hardware MS Galvanized &powder coating
Mounting Style Tower, Pole and Wall
Mechanical Down Tilt 20Dregree
Environmental Parameters
Temperature Range(Degree C) (-) 40 to (+) 70
Wind Speed(km/hr.) 200
Humidity 95% NO Condensation
SECTOR ANTENNA(4.9 - 6.0 GHz) for wierless communications p-p
Electrical Parameters
Frequency(MHz) 4900 - 5900
Gain(dBi) 2 X 19 +/- 0.5
VSWR(Max) 1.5:1 or 2:1
3 DB Beam width 90Degree
6 DB Beam width 120Degree
E Plane BW(Degree) 8+/-2
Polarization H&V
Port to Port Isolation(dB) >30 DB
Max. Power Input(Watts) 50 W
Impedance 50
Front-to-Back Ratio(dB) >35
Connector Termination 2XN(F)
Mechanical Parameters
Dimension 750X150X80 MM
Box Dimension 1020X160X100MM
Gross weight 4KGS
Supporting Pole Diameter 1.5 Inches to 2.5 Inches
Mounting Adjustment Azimuth(+/-)180Degree, Elevation -10-+15
Mounting Hardware MS Galvanized &powder coated
Radome UV Protected ABS
Mounting Style Tower, Pole
Environmental IP65
Mechanical Down Tilt 20Dregree
Environmental Parameters
Temperature Range(Degree C) (-) 20 to (+) 60
Wind Speed(km/hr.) 200
Humidity 95% NO Condensation
accessories
DC to AC gigabit poe power injector 30v, 30w, 1a
• I/P Voltage – 48v DC
• I/P Voltage range from 40v-60v
• O/P Voltage 30v DC
• O/P current 1A
• Power consumption 30W
• Power & Data
Data In Power + Data Out
1__________________1(-Power)
2__________________2(-Power)
3__________________3(+Power)
4__________________4(+Power)
5__________________5(+Power)
6__________________6(+Power)
7__________________7(-Power)
8__________________8(-Power)
• Short circuit , Reverse polarity, Over voltage/current & Over heating protection
• Casting is perforated to enable proper air circulation to avoid overheating
• PCB Terminal block for connecting I/P power cable
• Metallic RJ45 port for POE –OUT and Data ports
• Earthing port (6sqmm) and Metallic RJ45 connected to earthing
• LED indication for ON and O/P OK
• Labelling on I/P and O/P ports
• Specification label &Serial ,Lot number pasted on the POE
• Operating temperature –25 to +7
DC poe giga 55volt-35w-o.63a-ieee802.3af/at-4kv
General Specifications-
Efficiency to 84%(min.)-
Voltage Accuracy +/-2%
Line Regulation +/-1%
Load Regulation +/-2%
At 48V DC Input Output Voltage-55V DC & current-0.63A
Input Specification-
Voltage 35V to 72V DC
Output Specification-
Output Voltage 55V
Maximum Loading 0.7A
Minimum Loading 0A
Protections-
Overloading Protection Auto recovery
Output Short Circuit Auto recovery
Current Limiting Auto recovery
Reverse Polarity Auto recovery
Surge Protections (Inline) 4KV
Mechanical Characteristics-
Case Desktop Style
Color Black
Connectors/Sockets Input thru 3 pin Green connector and
output thru Dual Port RJ45
Dimension 150X57X37mm
Ethernet Gigabit
Cooling Self
Indicators Two LEDs(One glows when connected
with power & other glow when connected
with device)
Compliance IEEE802.3af/at
Environment Characteristics-
Operating Temperature 0 to 60degrees C
Storage Temperature -50 to 70degrees C
Operating Humidity 5 to 95%
Cooling Yes
Data In Power + Data Out
1__________________1(+Power)
2__________________2(+Power)
3__________________3(-Power)
4__________________4(+Power)
5__________________5(+Power)
6__________________6(-Power)
7__________________7(-Power)
8__________________8(-Power)
• Short circuit , Reverse polarity, Over voltage/current & Over heating protection
• Casting is perforated to enable proper air circulation to avoid overheating
• PCB Terminal block for connecting I/P power cable
• Metallic RJ45 port for POE –OUT and Data ports
• Earthing port (6sqmm) and Metallic RJ45 connected to earthing
• LED indication for ON and O/P OK
• Labelling on I/P and O/P ports
• Specification label &Serial ,Lot number pasted on the POE
• Operating temperature –25 to +7
Flexi-Clamp
The Flexi-Clamp is a pole and surface mount KIT that accommodates Tilting option
along with both vertical and horizontal pole mounting applications, as well as basic
flat wall mounting.
The Flexi-Clamp, which replaces the original L-Mount clamp boasts a strong design,
a longer pole length and base, and a wide articulation angle of 90o.
This comes preassembled, right out of the box. It is ready for any access point or
radio attached to it which is light weight and does not require put additional weight
and using minimum space at the Mast, Pole or Tower end.
Specification-
- Weight: 0.90 kg (31.74 oz)
- Mounting Base: 37 mm (1.45“) x 146 mm (5.7“)
- Pole Length: 195 mm (7.6“)
- Pole Outside Diameter: 38 mm (1.5“)
- Articulation Angle: 90o
- Mounting Options: Pole mount with two pipe clamp or surface mount with two
- screw hole points
- Assembly: Pre-assembled with a white powder coated finish; Mounting screws
and hose clamps are included